Moulds | 1 | 2 | 3 |

Preform 5 L

Moulds – Preform 5 L

Material: PET
Nests: 4
Removal: slider
Cycle time: 30 seconds
GCS: direct injection into the item by direct-flow injector with locking
moulding channel
Features: need for intensive cooling of the casting

More

Baby Diner

Moulds – Disposable Plates with Suction Cups

Material - Polypropylene
Material of suction cups: Soft PVC
Cycle time: 42 seconds
Number of flat connectors: 2
GCS - direct injection for bowl, combined channel for suction cups,
direct injection by direct-flow injector with locking moulding channel
Features: Provides a two-component product without turntable

More

Plastic Food Containers

Moulds – Plastic Food Containers

Moulds for food containers. Volume 0.5, 1l, 1.5 and 2.5l
Material: polypropylene
Thickness: 1 - 1, 5 mm
Nests: 2
System: hot runner
Cycle time: 6 seconds
Removal: tilt-table

More

Inner Backlights for LADA Samara

Moulds – Inner Backlights for LADA Samara

Material: PMMA
Colours: 2 - red, transparent (outer layer)
Nests: 2 (4 - [left + right] х 2 positions)
Removal: flat ejector pad
Cycle time: 80 seconds
GCS: two-level feeders, direct injection, locking channel for all colours
Features: for use on injection moulding machine with tilt-table

More

Outer Backlights for LADA Samara

Moulds – Outer Backlights for LADA Samara

Material: PMMA
Colours: 2 - 3: red, yellow, transparent (outer layer)
Nests: 2 (4 - [left + right] х 2 positions)
Removal: flat ejector pad
Cycle time: 80 seconds
GCS: two-level feeders, direct injection, locking channel for all colours
Features: for use on injection moulding machine with tilt-table

More

Plastic Vegetable Baskets

Moulds – Plastic Vegetable Baskets

Weight: 1,6 kg, size: 600 х 400 х 200 mm
Nests: 1
Cycle time: 60 seconds
Mechanism: 4 inclined slides, hydraulic drive
Removal: tilt-table
GCS: 4 points inlets
Features: designed to obtain three-drawer performances; with holes in the bottom and sides; the sides only; without holes. Removable inserts for punches and lateral slide

More

PET Seal Caps

Moulds – PET Seal Caps

Type: 32 channel pre-form mould
Material: Polyethylene
Cycle time: 7 seconds
GCS: direct inlets, internal heating
Mechanism: wedge system
Removal: piston ring ejectors
Features: multiple nests in conjunction with wedge scheme of function require high precision. This type of GCS provides high reliability

More

Lotion Jars

Moulds – Lotion Jars

Material: polyethylene
Nests: 16
Cycle time: 10 seconds
Mechanism: 3-plane size sockets
Removal: tilt-table
GCS: direct inlet, injectors of special design
Features: complicated manufacturing process

More

Backlights for GAZEL Cars

Moulds – Backlights for GAZEL Cars

Material: PMMA
Colours: 3 - red, grey, transparent
Nests: 2 (4 - [left + right] х 2 positions)
Removal: flat ejector pad
Cycle time: 80 seconds
GCS: two-level feeders, direct injection, locking channel for all colours
Features: for use on injection moulding machine with tilt-table

More

| 1 | 2 | 3 |

Telephone +380-57-7281278, +380-93-8221733 Int'l Telefax +380-57-7125385 Email order@inkol.com.ua